激光跟踪仪在核电站主管道安装中的应用     

郭建兵 《北京测绘》2020,(1):123-125

目前,核电站的主管道焊接越来越多的采用了自动焊技术,这有利于提高焊接质量效率,还可以压缩建设成本。然而,主管道自动焊对焊缝的限差较现有工艺要求更高,高精度的测量是实现主管道自动焊的必要条件之一。本文针对主管道自动焊管口组队高精度的技术要求,提出采用激光跟踪仪对主管道自动焊相关的设备进行更为精密的三维工业测量,通过理论技术评定测量精度,然后选择测量仪器和编制具体的测量方案,最终保证了主管道自动焊精确组对的实现。  相似文献   

一种由粗到精的地面激光点云多层级配准方法     

王英  张云生 《测绘与空间地理信息》2020,(2):156-159

提出了一种综合利用快速点特征直方图(FPFH)描述符和同名点引导ICP优化的地面激光扫描(TLS)点云配准方法。该方法包括3个步骤:1)点云金字塔构建;2)基于FPFH的粗配准;3)同名点引导的ICP精配准。首先使用体素网格滤波器构造点云的金字塔结构,在粗配准时,FPFH描述符用于金字塔顶层上点云的鲁棒匹配,在此基础上,再进行两层级同名点引导的ICP精配准优化,使用3组典型TLS点云对进行实验,结果表明本文方法可以高效地完成TLS点云的配准。  相似文献   

燕山中部大地热流及岩石圈热结构特征——以承德市七家- 茅荆坝地热田为例     

刘峰  王贵玲  张薇  岳晨  陆川  黄起伟  欧小科 《地质学报》2020,94(7):1950-1959

燕山中部地区地热资源丰富,地热地质条件较好,但该地区大地热流测量工作较少,岩石圈热结构研究尚未开展,制约了该地区的地热地质研究与资源勘探开发。本文以该地区的七家-茅荆坝地热田为典型区,结合地温测井、取样测试、数据收集与分析,初步查明燕山中部大地热流特征及浅部-深部岩层热物性特征,填补了大地热流值测量空白区,在此基础上建立了研究区热结构概念模型,估算其深部地温分布。研究得出燕山中部大地热流值变化较大,平均约57 mW/m~2,与周边温泉水温存在较好的相关关系。其中七家-茅荆坝地热田大地热流值较高,为74.9 mW/m~2。通过深部地温分布计算得出七家—茅荆坝地区居里面埋深为21.5～22.8 km,莫霍面温度约815℃,分析结果与前人研究成果较为一致,验证了本文所建立岩石圈热结构模型的准确性。  相似文献   

Effect of different registration methods on precision of orientation based on RTK registration/georeferencing mode     

Shengming Hu  Zhijian Chen  Chenghui Wan  Chun Tang  Wen Xiong 《Marine Georesources & Geotechnology》2020,38(4):385-392

Abstract

Compared with traditional methods, the three-dimensional laser-scanning (3D-LS) technique can efficiently acquire many high-quality geometric properties of rock discontinuities. In practice, engineers usually prefer to simplify the processing by using single-station point data and roughly orienting owing to the complexity of registration/georeferencing multi-station point data. However, prior published studies have paid little attention to the accuracy and reliability when determining discontinuity orientations using 3D-LS. We propose a reliable and accurate method with robust on-site applicability. As part of an ongoing effort, we are evaluating the precision of the commonly used coarse registration method and the fine registration method, and promoted the optimized coarse- and fine-registration methods and evaluated their precision. It is found that: (1) the common and the optimized registration method can meet our project’s engineering requirements, and the optimized registration method improved accuracy in the dip direction by approximately 1°; (2) fine registration using an iterative closest point (ICP) algorithm can correct both dip direction and dip angle; and (3) the orientation is of high precision with commonly used coarse and fine registration, whereas the optimization effect to correct the orientation is slightly limited.  相似文献   

The δ60/58Ni Values of Twenty‐Six Selected Geological Reference Materials     

Weihan Li  Jian‐Ming Zhu  Decan Tan  Guilin Han  Zhouqiao Zhao  Guangliang Wu 《Geostandards and Geoanalytical Research》2020,44(3):523-535

The high‐precision δ^60/58Ni values of twenty‐six geological reference materials, including igneous rocks, sedimentary rocks, stream sediments, soils and plants are reported. The δ^60/58Ni values of all samples were determined by double‐spike MC‐ICP‐MS (Nu Plasma III). Isotope standard solution (NIST SRM 986) and geological reference materials (BHVO‐2, BCR‐2, JP‐1, PCC‐1, etc.) were used to evaluate the measurement bias and intermediate precision over a period of six months. Our results show that the intermediate precision of Ni isotope determination was 0.05‰ (2s, n = 69) for spiked NIST SRM 986 and typically 0.06‰ for actual samples, and the δ^60/58Ni _{NIST SRM 986} values were in excellent agreement with previous studies. Eighteen high‐precision Ni isotope ratios of geological reference materials are first reported here, and their δ^60/58Ni values varied from ?0.27‰ to 0.52‰, with a mean of 0.13 ± 0.34‰ (2s, n = 18). Additionally, SGR‐1b (0.56 ± 0.04‰, 2s), GSS‐1 (?0.27 ± 0.06‰, 2s), GSS‐7 (?0.11 ± 0.01‰, 2s), GSD‐10 (0.46 ± 0.06‰, 2s) and GSB‐12 (0.52 ± 0.06‰, 2s) could potentially serve as candidate reference materials for Ni isotope fractionation and comparison of Ni isotopic compositions among different laboratories.  相似文献   

联合BDS/GPS的北斗广域差分实时电离层延迟格网改正方法研究     

房成贺  陈俊平  兰孝奇  张磊 《大地测量与地球动力学》2019,39(2):169-177

研究并实现中国区域北斗广域差分实时电离层延迟格网改正算法，针对北斗单系统实时建立电离层延迟格网的不足，提出联合BDS/GPS的北斗广域差分实时电离层延迟改正方法。比较BDS、GPS以及BDS/GPS观测的实时电离层延迟格网，并利用北斗单频单点伪距定位进行精度验证。结果表明，在有效格网点覆盖充足的地区，BDS与GPS实时电离层延迟格网定位效果相当；而联合BDS/GPS观测的实时电离层延迟格网极大提高了偏远地区的单频定位精度与可定位历元数，也使原本单系统格网覆盖充足的地区定位效果得到进一步增强和稳定。  相似文献   

徕卡RTC360三维激光扫描仪在竣工测量中的应用     

汪晓慧  吴晓培 《测绘通报》2019,(10):150-154,159

徕卡RTC360不仅操作简单、扫描速度快，而且非常智能。可以实时跟踪计算两个连续站点间的相对位置，点云实时预拼接。后期搭配Register360智能拼接软件，点云智能拼接处理，无需人工干预，简单高效。  相似文献   

Terrestrial heat flow and lithospheric thermal structure in the Chagan Depression of the Yingen-Ejinaqi Basin,north central China     

Yinhui Zuo  Shu Jiang  Shihu Wu  Wei Xu  Jiong Zhang  Renpeng Feng  Meihua Yang  Yongshui Zhou  M. Santosh 《Basin Research》2020,32(6):1328-1346

The Chagan Depression in the Yingen-Ejinaqi Basin, located at the intersection of the Paleo-Asian Ocean and the Tethys Ocean domains is an important region to gain insights on terrestrial heat flow, lithospheric thermal structure and deep geodynamic processes. Here, we compute terrestrial heat flow values in the Chagan Depression using a large set of system steady-state temperature data from four representative wells and rock thermal conductivity. We also estimate the “thermal” lithospheric thickness, mantle heat flow, ratio of mantle heat flow to surface heat flow and Moho temperature to evaluate the regional tectonic framework and deep dynamics. The results show that the heat flow in the Chagan Depression ranges from 66.5 to 69.8 mW/m², with an average value of 68.3 ± 1.2 mW/m². The Chagan Depression is characterized by a thin “thermal” lithosphere, high mantle heat flow, and high Moho temperature, corresponding to the lithospheric thermal structure of “cold mantle and hot crust” type. We correlate the formation of the Yingen-Ejinaqi Basin to the Early Cretaceous and Cenozoic subduction of the western Pacific Plate and the Cenozoic multiple extrusions. Our results provide new insights into the thermal structure and dynamics of the lithospheric evolution in central China.  相似文献   

1980—2015年风蚀影响下中国北方土壤有机质与养分流失时空特征     

赵海鹏  宋宏权  刘鹏飞  李霄阳  王团徽 《地理研究》2019,38(11):2778-2789

中国北方干旱/半干旱区是全球主要的沙尘源区之一,风蚀造成的沙尘排放可导致大量的土壤有机质（SOM）与养分流失,并通过传输与沉降过程对其进行空间再分配,对空气质量、气候变化、植被生长及生物地球化学过程等具有重要影响。本文利用WRF/Chem（Weather Research Forecasting with Chemistry）v3.7.1大气化学传输模型,对1980—2015年间中国北方沙尘排放及其引起的SOM、全氮（TN）与全磷（TP）的时空变化过程进行了精细化模拟,探究了中国北方风蚀引起的SOM、TN与TP养分流失的时空变化特征。结果表明：① 1980—2015年来平均每年约有66.59 Tg的沙尘颗粒排放至大气;② 沙尘排放具有较大的时空差异,沙尘排放源区主要集中在新疆东部、内蒙古西部的巴丹吉林沙漠和腾格里沙漠等地区;③ 每年因沙尘排放引起的SOM、TN和TP流失量分别约为0.07 Tg、0.004 Tg和0.005 Tg;④ 1980—2015年间中国北方沙尘排放及其引起的SOM、TN与TP的流失量具有较强的年际波动,未呈现显著的趋势性变化特征。本研究对于认知风蚀在碳循环与养分循环过程中的作用,以及对深入了解中国北方的土地退化机理具有重要意义。  相似文献   

中国绿洲城市土地利用/覆盖变化研究进展          下载免费PDF全文

王一航  夏沛  刘志锋  卢文路  何春阳 《干旱区地理》2019,42(2):341-353

绿洲城市是干旱区人类生产和生活的集聚中心，也是人地关系最为敏感的区域之一。了解绿洲城市土地利用/覆盖变化的研究进展对于改善区域人地关系、促进绿洲城市可持续发展具有重要意义。利用系统综述方法，对研究我国绿洲城市土地利用/覆盖变化的相关文献进行梳理，在综述已有研究进展的基础上，探讨了已有研究存在的不足并对未来研究方向进行展望。绿洲城市土地利用/覆盖变化研究的相关文献数量和被引频次均呈增长趋势。已有研究主要在局地尺度上分析了绿洲城市土地利用/覆盖变化的过程、驱动机制和生态环境效应，关于绿洲城市可持续性和基于区域尺度的相关研究较少。因此，未来应在多个尺度上开展工作，综合研究绿洲城市土地利用/覆盖变化的过程、影响和可持续性。  相似文献